Why grow ceanothus against a wall?
Ceanothus is one of the most popular wall shrubs in the UK, and for good reason. A sunny wall gives it the warmth and shelter it needs. The brickwork absorbs heat during the day and releases it at night, and the wall blocks cold winds that would otherwise scorch evergreen leaves. Wall-trained ceanothus are often less prone to winter damage than free-standing ones, can grow noticeably taller, and are less likely to suffer wind rock.
Ceanothus isn’t a climber. It has no tendrils, twining stems or aerial roots, so it has to be tied to supports. In return it makes a dense, flat curtain of evergreen leaves, covered in blue flowers in spring.
Choosing the right wall or fence
- Aspect: a south- or west-facing wall is ideal. East-facing walls can work in milder areas, but early morning sun on frozen leaves can make frost damage worse. North-facing walls are generally too shady for good flowering.
- Height: allow for the eventual size of the cultivar. Most wall ceanothus reach 2–3m or more, and vigorous types can grow taller against a warm wall.
- Walls vs fences: both work. A solid masonry wall stores more heat than a fence, so it gives more protection. If you use a fence, make sure it’s sturdy enough to carry a heavy evergreen shrub, and remember that fence panels may need maintenance or replacement during the plant’s life.
- Access: leave room to reach the plant for pruning, and to maintain the wall or any windows behind it.
Best ceanothus for walls
Evergreen, spring-flowering cultivars with fairly flexible stems are the usual choice:
- ‘Concha’: deep blue flowers from reddish buds, dense and reliable
- ‘Puget Blue’: deep blue, vigorous
- ‘Cascade’: arching branches with powder-blue flowers
- ‘Italian Skies’: bright blue, good for a medium-sized wall
- ‘Autumnal Blue’: sky blue, flowers late summer to autumn
- ‘Trewithen Blue’: very vigorous, for a large wall or corner, where it can grow tall
- ‘Snow Flurry’: white flowers for a pale or contrasting scheme
Small and ground-cover types, such as those in our guide to low-growing ceanothus, aren’t suited to wall training, but they can be planted to spill over the top of a low wall. Deciduous cultivars can be grown against walls too, but they’re usually pruned hard each spring, so they make a less permanent wall covering.
Putting up supports
Horizontal wires are the most common and least visible support.
- Fit vine eyes or wall plugs into the mortar or posts along the wall, spaced roughly 1.5–2m apart along each row.
- Run galvanised or plastic-coated wire between them, pulled taut. Some gardeners use a wire tensioner at one end.
- Space the rows around 30–45cm apart vertically, starting about 30–45cm above the ground and going up as high as you want the plant to reach.
- Keep the wires a few centimetres (around 5cm) away from the wall. That leaves room for the stems to be tied in and lets air circulate behind the plant.
A wooden trellis panel, fixed to battens so it stands a little way off the wall, is an alternative, especially on fences.
Planting next to a wall
Soil at the foot of a wall is often dry, because the wall casts a rain shadow and foundations or rubble can be buried there.
- Plant around 30–45cm away from the wall, not right against it.
- Dig a generous hole, remove any builders’ rubble, and improve very poor soil with some organic matter. Keep drainage good, though, because ceanothus dislikes wet roots.
- Angle the plant slightly towards the wall, so the stems lean in towards the supports.
- Water thoroughly after planting, and water regularly through the first summer. Plants at the base of a wall can dry out faster than the rest of the garden.
- Plant in spring if possible, to give the roots time to establish before winter.
Training a young plant
Year one
- After planting, untie the plant from its cane and spread out the main stems in a fan shape towards the wires.
- Tie them in loosely with soft garden twine or plant ties. Avoid tight wire ties, which can cut into the bark as stems thicken.
- Remove any shoots growing directly towards the wall or straight out from it.
- Leave the main upright stems unpruned, so they can extend and fill the space.
Years two to three
- Each year after flowering, tie in new shoots that are growing in the direction you want, filling gaps and covering the wall evenly.
- Trim back outward-facing shoots that you don’t need, cutting to a leafy shoot or bud.
- Shorten sideshoots lightly to encourage dense growth close to the wall.
- Once the plant reaches the top of its supports, trim the leading shoots at the height you want.
Ceanothus stems stiffen as they age, so tie them in while they’re young and flexible. Older branches can snap if you force them into position.
Pruning an established wall ceanothus
Once the plant covers its allotted space, the yearly job is simple:
- Prune just after flowering for spring-flowering cultivars, or in spring for late-flowering ones such as ‘Autumnal Blue’.
- Cut back shoots growing away from the wall, leaving a few leaves at the base of each.
- Shorten the season’s growth where needed to keep the plant within bounds, cutting back by roughly a third to a half.
- Tie in any new shoots needed to fill gaps.
- Avoid cutting into bare, old wood, because evergreen ceanothus seldom resprouts from it.
Regular, light trimming keeps a wall ceanothus dense and flat. Infrequent, heavy cuts tend to leave bare patches. For more on this, see our article on shaping a California lilac.
Dealing with breastwood and outward shoots
“Breastwood” means shoots that grow directly out from the face of the plant, away from the wall. If left, they make the shrub progressively deeper and bulkier, and it can start to pull away from its supports. Trim breastwood back after flowering each year, to a short stub or a leafy sideshoot close to the main framework. Also remove any shoots growing behind the wires, between the plant and the wall, because they can push the plant away from its supports and trap moisture against the wall.
Common problems with wall-trained ceanothus
- Drought at the base of the wall: water young plants regularly, and established ones during long dry spells.
- Pulling away from the wall: usually from too much breastwood or ties that have failed, so trim outward growth and check the ties every year.
- Bare lower stems: often from a lack of early training or from hard pruning, so tie in low shoots while the plant is young.
- Frost damage despite the wall: a very hard winter can still damage ceanothus. Wait until late spring to see what regrows before cutting back.
- Ties cutting into stems: loosen or replace ties as the stems thicken.
For other issues, including yellowing and root problems, see common problems with ceanothus. For general care, see our main guide to growing Californian lilac.