Quick answer
To make a topiary as a beginner:
- Choose an easy, small-leaved evergreen such as box, Japanese holly, box-leaf honeysuckle or privet. Pick one that is already bushy.
- Start with a simple shape, ideally a ball, cone or lollipop.
- Clip lightly and often with sharp shears, taking off a little at a time and stepping back to check the outline.
- Be patient. The shape thickens over a few seasons as each trim pushes out new shoots.
You don’t need a frame for simple geometric shapes, and you don’t need an expensive pre-shaped plant. A well-branched shrub from a garden center is a good start.
What you’ll need
- A young, bushy evergreen shrub in a pot or in the ground.
- Hand shears or topiary shears for clipping. Small one-handed shears give good control on small shapes.
- Sharp bypass secateurs for thicker stems and for larger-leaved plants such as bay.
- Bamboo canes and soft garden twine, for a cone guide or a lollipop stake.
- A sheet or tarp to catch clippings, which makes cleanup easier. With box, clearing clippings also matters for disease hygiene.
- Disinfectant (such as rubbing alcohol) to wipe blades, particularly if box blight occurs in your area.
Step 1: Choose an easy plant
The best beginner plants have small leaves, grow densely and regrow readily after cutting:
- Box (Buxus) is the classic. It’s slow, so shapes stay neat for months, though they take longer to form. In areas with box blight or box tree caterpillar, consider an alternative.
- Japanese holly (Ilex crenata) looks very like box and is a common substitute.
- Box-leaf honeysuckle (Lonicera nitida) grows fast, so results come quickly, but it needs trimming more often.
- Privet (Ligustrum) is good for lollipops and quick-growing shapes.
- Rosemary and myrtle suit small pot topiaries in mild climates.
Our guide to the best evergreen shrubs for topiary compares these and more.
When choosing an individual plant, look for dense, even branching right down to the base. For a lollipop, choose one with a single strong, straight central stem. A plant whose natural shape is close to your target saves a lot of time. Pick a rounded plant for a ball and an upright plant for a cone.
Step 2: Pick a beginner-friendly shape
- Ball: the most forgiving shape, and easy to keep up.
- Cone or pyramid: straightforward with a cane guide.
- Lollipop (standard): a ball on a clear stem. Takes a little longer, but looks impressive in a pot.
Leave spirals, animals and complex figures until you’ve kept a simple shape going for a season or two.
How to make a ball topiary
- Look at the plant from all sides and decide how big the ball will be. Start with the size the plant already is, minus only the straggly tips.
- Clip the top first, forming a gentle dome.
- Work down and around the sides, keeping the blades flat against the curve. Make small cuts and turn the pot (or walk around the plant) often.
- Step back regularly to check the outline. It is easy to make a ball lopsided or egg-shaped by over-clipping one side.
- Aim for the height to match the width, so it reads as a sphere.
- Finish with a light pass to tidy stray shoots.
A circle cut from cardboard (a ring the diameter of your ball, cut in half) can be held against the plant as a template if you find shaping by eye difficult.
How to make a cone topiary
- Push three or four bamboo canes into the soil or pot around the plant, evenly spaced, and tie them together at the top to form a wigwam at the height you want.
- Clip along the line of the canes, working from the bottom up. The canes give you a straight edge to follow.
- Keep the base slightly wider than you think you need. Cones always look narrower once clipped.
- Remove the canes once the shape is clear, or leave them in place for the first year or two to guide each trim.
How to make a lollipop (standard) topiary
- Choose the strongest, straightest stem as the trunk. Push a cane in beside it and tie it loosely in several places.
- Remove competing stems from the base.
- Strip side shoots gradually from the lower part of the trunk, working up to where you want the ball to start. Taking them off over a season or two, rather than all at once, helps the stem thicken.
- Let the main stem grow until it’s a little above your intended ball height, then pinch out the tip to encourage branching at the top.
- Clip the head into a ball as it bushes out, using the ball method above.
- Keep the stake in until the trunk can support the head, and keep rubbing off shoots that sprout from the trunk.
Using a frame
Wire frames (balls, cones, spirals, animals) take the guesswork out of more complicated shapes:
- Place the frame over a young plant and fix it firmly into the pot or ground.
- As shoots grow through the wire, clip them back to the frame’s outline.
- For climbing plants such as ivy or creeping fig, tie or tuck the stems around the frame as they grow and pinch tips to encourage branching. This is a quick way to make a small figurative topiary.
How long does a topiary take to make?
It depends on the plant, the starting size and the shape. A simple ball from a bushy shrub can look presentable after the first clip and fill out properly over a couple of seasons. Lollipops and cones from small plants often take a few years. Large or detailed shapes in slow plants like box and yew can take many years. Fast growers like Lonicera and privet get there sooner but need more frequent trimming once they do.
Looking after your first topiary
- Trim lightly two or three times during the growing season to keep the shape crisp. Box usually needs only one or two trims a year. See when and how to trim box topiary for timing.
- Water regularly, especially in pots, which dry out quickly.
- Feed in spring and through summer for pots, using a balanced fertilizer at the rates on the label.
- Rotate potted topiary now and then so all sides get similar light.
- Plan for winter. Potted shapes and tender plants need extra protection. See whether topiary trees can survive winter.
Common beginner mistakes
- Cutting too hard too soon. Remove a little at a time. You can always take off more, but regrowth can take months.
- Cutting into bare, leafless wood on conifers such as juniper and thuja, which usually won’t regrow from it.
- Trimming in hot sun. Freshly exposed inner leaves can scorch. Clip on an overcast day.
- Trimming too late in the year. Late cuts encourage soft growth that frost can damage.
- Using blunt tools, which tear stems and leave brown, ragged edges.
- Ignoring pests and diseases. On box, check regularly for box tree caterpillar and box blight.