First, can your hedge be renovated?
Whether you can cut an overgrown hedge back hard depends almost entirely on the plant. Many broadleaved hedges, and yew, will sprout new shoots from old, bare wood. Most conifers won’t.
Usually respond well to hard renovation:
- Yew (the main exception among conifers)
- Cherry laurel and Portuguese laurel
- Privet
- Holly
- Beech and hornbeam
- Hawthorn, blackthorn, hazel and field maple
- Lonicera nitida
- Escallonia
- Photinia
- Cherry plum, including purple-leaved forms (renovate in summer)
Less predictable, so go gradually:
- Box, which often regrows but slowly. Healthy plants respond best.
- Griselinia
- Hebes. See pruning a hebe.
- Old, weak or diseased hedges of any species
Won’t regrow from bare, brown wood:
- Leylandii
- Lawson cypress and most other cypresses
- Most junipers and many other conifers apart from yew
- Lavender
For hedges in the last group, you can only trim within the green, leafy growth. See the Leylandii section below.
When to renovate a hedge
- Deciduous hedges (beech, hornbeam, hawthorn, privet in cold areas): in winter, while dormant. Roughly December to February in Britain and Ireland is a common window. Birds aren’t nesting then, and you can see the branch structure clearly.
- Evergreen hedges (yew, laurel, holly, escallonia): mid-spring is often recommended, as growth starts, so the plant can recover quickly. That can overlap with early bird nesting, so check thoroughly first. See our guide on when to cut a hedge.
- Plums and cherries (Prunus, but not laurels): in summer, to reduce the risk of silver leaf and canker.
Avoid hard pruning in late summer and autumn. Regrowth may not harden before winter.
Tools and safety
You’ll usually need:
- Hedge trimmer for the soft outer growth
- Loppers for branches up to about thumb thickness
- Pruning saw for thicker branches
- Gloves and eye protection. Thorny hedges and flying debris are a real hazard.
- A stable platform or tripod ladder for tall hedges
Tall, wide or very woody hedges, and anything near power lines, are often best left to a professional tree surgeon or hedge contractor. Working at height with powered cutting tools is risky.
The staggered method
For most hedges, spreading renovation over two or three years is the safest approach. The hedge always keeps enough leaf to feed itself, and it never looks completely bare.
Year 1: cut one side back hard.
- Clear away weeds, brambles and climbers from the base so you can see the main stems.
- Using loppers and a saw, cut back the side branches on one face of the hedge, close to the main stems. Aim for a point somewhat narrower than the width you eventually want, so the regrowth can fill out to the final line.
- Leave the other side and the top as they are, or just trim them lightly.
Year 2: cut the other side.
Once the first side has produced healthy new shoots, cut back the opposite face in the same way. On slow hedges such as yew, or weaker plants, you may need to wait more than one year.
Year 3: reduce the top, if needed.
Cut the top down to below your target height so the regrowth can thicken it at the right level.
Throughout, aim for a slight taper, or “batter”, so the hedge is wider at the base than the top. This lets light reach the lower branches and helps prevent bare bottoms.
Cutting the height down
To lower an overgrown hedge:
- Use a taut string line between canes as a guide to cut a level top.
- Cut slightly lower than the height you finally want, perhaps 15–30 cm below, so new shoots can grow up and fill the top.
- For very tall hedges, reduce the height in stages over successive years rather than all at once, especially on less vigorous plants.
Severe renovation in one go
Some very vigorous hedges, notably privet, cherry laurel and hawthorn, can often be cut back hard all at once. Sometimes that means cutting to within about 30 cm of the ground, or even lower for privet, after which the plants regrow from the base. This works best on healthy, established plants. It’s riskier for older or weaker hedges, and it leaves you with no screen for a year or two. If privacy matters, or you’re unsure of the hedge’s health, use the staggered method.
Don’t do this with yew, box, griselinia or any conifer other than yew. Even yew is safer renovated one side at a time.
Aftercare
Renovation takes a lot out of a hedge, so help it recover:
- Feed in spring with a general-purpose fertiliser, following the label rates.
- Mulch the base with well-rotted compost or bark to hold moisture.
- Water thoroughly in dry spells during the following spring and summer.
- Keep the base clear of weeds and grass.
- Trim the new shoots lightly once they’ve grown, to encourage them to branch and thicken.
Renovating a Leylandii or other conifer hedge
Leylandii can’t be cut back into bare wood. If it’s cut beyond the green growth, those areas usually stay brown and bare permanently. That leaves limited options:
- Width: you can only trim back to just within the green foliage. A hedge that’s grown far too wide can’t be made much narrower without leaving bare patches.
- Height: reducing the height is possible, and the hedge won’t regrow a pointed top. The cut top will look flat and may take a while to green over from the sides. Large reductions are best done gradually and, for tall hedges, by professionals.
- Prevention: regular trimming, at least once and usually twice a year, is the only real way to keep a Leylandii hedge at a manageable size.
If a conifer hedge has got completely out of hand, replacing it may be more practical than trying to rescue it.
Filling gaps and bare bases
- Thin bases: the staggered method and a tapered shape help lower branches thicken again on species that respond to renovation.
- Gaps from dead plants: clear the gap, improve the soil, and plant a new specimen of the same species in the dormant season. Water it well, because it competes with established neighbours. See our hedge spacing guide.
- Laying: traditional hedge-laying, which involves partly cutting through stems and bending them over, is used to rejuvenate native field hedges such as hawthorn. It’s a skilled job, best learned from a local course or done by a professional hedge-layer.
When to replace the hedge instead
Consider starting again if:
- The hedge is a conifer that’s far too wide or bare inside
- Many plants are dead, diseased or failing to regrow
- It’s the wrong plant for the site, for example a huge laurel squeezed into a narrow bed
- You’d prefer a hedge that needs less work
If you’re replanting, our guide to choosing evergreen hedge plants and our article on bare-root hedging will help you plan a replacement that’s easier to keep in shape.